Maintenance - GMC GDS115 Bedienungsanleitung

Accessories
• A range of accessories and consumables, including sanding drums
(see guide below), is available from your GMC stockist. Spare parts can be
obtained from toolsparesonline.com

Maintenance

WARNING: ALWAYS disconnect from the power supply before carrying out any
inspection, maintenance or cleaning.
General inspection
• Regularly check that all the fixing screws are tight
• Inspect the supply cord of the tool, prior to each use, for damage or wear. Repairs
should be carried out by an authorised GMC service centre. This advice also
applies to extension cords used with this tool
Product Code
GMC3M80G
GMC3M120G
GBDG180
GBDG80
GBDFD
GBDSW
Description
Aluminium oxide abrasive secured to cloth
80 Grit Sanding
backing material with a synthetic resin.
Sleeve 3pk
Aluminium oxide abrasive secured to cloth
120 Grit Sanding
backing material with a synthetic resin.
Sleeve 3pk
Nylon web grinding wheel - G180.
180 Grit Nylon Web Drum
Elastic grain-coated nylon web.
Nylon web grinding wheel - G80.
80 Grit Nylon Web Drum
Elastic grain-coated nylon web
Flap/nylon web grinding wheel. Pink
Flap Drum aluminium oxide grinding flaps combined with
Steel Wire Brush Drum
*Contact your GMC stockist or www.gmctools.com for the product codes
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear
quickly, and shorten the machine's service life. Clean the body of your machine
with a soft brush, or dry cloth. If available, use clean, dry, compressed air to blow
through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not use
alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Note: Be especially careful to clean the machine thoroughly if used for both wood and
metal. Sparks from metalwork can easily ignite wood dust.
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Construction
Smooth sleeve join
Smooth sleeve join
grain-coated nylon web
Steel wire drum assembly
9
Usage
For sanding metal
For sanding metal
For light removal of tarnish, glaze, scratches,
surface coatings on ferrous/ non-ferrous metals,
wood and other materials. Suitable for sanding,
basic polishing and second stage polishing for steel
and non-ferrous metals. Used for fine polishing of
steel and non-ferrous metals
For removal of tarnish, glaze, scratches, surface
coatings on ferrous/ non-ferrous metals, wood
and other materials. Suitable for sanding, basic
polishing and first stage polishing for steel and
non-ferrous metals. Used for fine polishing of wood
to smooth surfaces
For removal of tarnish, glaze, scratches, surface
coatings on ferrous/non-ferrous metals, wood and
other materials
For fast removal of rust and corrosion. De-burring
and cleaning metal. Also suitable for abrasive uses
for wood and other materials
GB