EN
4. INSTALLATION METHOD
9. Connect the smart port to the wire controller (if needed)
1. Remove the top cover from the gap between the top
cover and bottom by a tool with flat head. (See Fig.4-11)
2. Use the connective cable to connect the wire controller
and CN3 of the smart port. (See Fig.4-12)(refer to the
Wire controller manual for details)
NOTE:
Connection for wired control function by KJR-120C/TF-E
KJR-120G2/TFBG-E
50
Fig 4-11
CN3
Fig 4-12