Hartan R1 Bedienungsanleitung Seite 16

Instructions
Unfolding the pram
By pushing the lock buttons 4, unfold the upper section to bring the handle in
horizontal position. Pull handle 1 upwards until handle catch 2 has engaged.
WARNING! Before using the pram, make sure all catches are locked.
Folding the pram
Turn safety turn-lock 3 inward until the handle's 1 catch has released. Push
handle downwards to fold the pram. By pushing the lock buttons 4, fold the
handle's upper section inward. WARNING! We recommend proceeding with
caution when folding and unfolding the chassis, and adjusting the backrest,
as there is a risk that you do yourself an injury such as jamming your limbs,
fingers, etc.
Changing of wheels
Push the button 5 to release the retention, and pull off the wheel.
Push the wheel right to the axle's stop, and press down the button.
Make sure, all wheels are held in place properly.
Lock-type-swivel wheels
Turn the cap 6 so that the red point is visible to pre-select the straight-line
motion mode, which will be activated the moment the wheels point in
forward direction. Turn the cap 6 so that the green point is visible to
release the swivel lock. To remove the wheel, release the push-button
in the centre of the cap 6 and pull the wheel off the holding device.
To assemble the wheel, insert the fastening pin in the holding device, and
depress the push-button inside the cap, which is indicated by a click
sound.
Parking brake
Push the red brake button 7 to engage the brake. Having parked the pram,
try to push it to check the brake. Push the green brake button 7 to release
the brake. WARNING! Make sure the brake is always closed when placing
the baby in the carriage or taking
it out of it.
Adjustable suspension
system
By turning the selector 8, a
"hard" or "soft" position can
be selected for suspension.
8 7 8
12