Wiseup DVR-0022A Benutzerhandbuch Seite 3

(2) Press the Video/Camera Button once to take a photo. The camera will vibrate
once and the red light indicator will flash every time you take a photo.
4) AUDIO RECORDING
(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
(2) Press the Power On/Off button once to record audio. The camera will vibrate 6
times and the red light indicator will flash 3 times and then turn off
(3) Press the Power On/Off button once to stop audio recording and the camera will
enter into standby mode. The camera will vibrate 3 times and the red indicator light
will flash 3 times.
5) VIDEO/PHOTO/AUDIO FILE UPLOADS
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port with the USB cable
provided.
(3) The camera will be recognized as a removable disk drive.
(4) All of your video, photo and audio files can be accessed in the drive.
6) SET THE DATE/TIME STAMP
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port with the USB cable
provided.
(3) Removable disk drive folder appears
(4) Click on the drive in the root directory and inside the root directory, create a
time.txt file.
(5) Write the desired date and time in the txt file with the correct format:
Year-Month-Date Hour:Minute:Second. Save this file.
(6) Restart the camera and the system will upgrade the program automatically.
7) CHARGING
(1) Connect the camera to a PC computer or a DC5V charger adapter (recommended)