Identification Of Manufacturer And Equipment; Safety Information; Safety Regulations - Stiga Autoclip serie Bedienungsanleitung

IDENTIFICATION OF MANUFACTURER AND EQUIPMENT

The nameplate shown here is applied directly onto the appliance.
It contains references and all the information essential for safely
operating the device.
For any technical requirements, please contact the Manufacturer's
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identification plate, the approximate hours of use and the type of
fault detected.
A. Name of manufacturer.
B. CE conformity label.
C. Model and Version / serial number / manufacturing year.
D. Technical data: voltage, current, protection rating, mass,
cutting width.

SAFETY INFORMATION

The manufacturer carefully considered the possible hazards and personal risks that may result from interacting with the
equipment. The purpose of this information is to inform users on the need to use extreme caution in order to avoid risks.
THIS PRODUCT COMES WITH A BLADE AND IS NOT A TOY!
• Please read the manual carefully, especially the safety instructions, and make sure you
understand them fully before using the product. Only use the equipment for the purposes
specifically intended by the manufacturer. Carefully follow the instructions on operation,
maintenance and repair.
• When using the robot, make sure there is no one in the working area, in particular children, the
elderly or disabled and pets. Otherwise, program the robot to operate during hours when there
is no one in this area. Keep an eye on the robot if you know that pets, children or other people
are in the area. If a person or animal is found on the robot's path, stop it immediately.
• Monitor the robot when it is operating in areas next to public or private areas that are not
securely fenced off.
• This robot is not suitable for use by children and people with reduced physical, sensory or
mental capabilities or inexperienced people who are not familiar with the product, unless they
are supervised by a person responsible for their safety or have received instructions on how
to use the appliance. Children should be supervised to ensure that they do not play with the
appliance.
• Do not allow the robot to be used by people who do not know how it works.
• Operators who perform maintenance and repair work must be fully conversant with its special
features and safety regulations. Before using the robot, carefully read the operating manual and
make sure you understand the instructions.
• Never remove, bypass or tamper with the safety devices installed. The Manufacturer shall not
be held liable if non-original spare parts are used. Failure to comply with this requirement may
seriously endanger the health and safety of people.
• Check that there are no toys, tools, branches, clothing or other objects on the lawn which
can damage the blades. Any objects on the lawn can also damage or prevent the correct
functioning of the robot.
DATA PLATE
(C) Model
(D) Technical
specifications

SAFETY REGULATIONS

3
(A) Name of manufacturer
(C) Manufacturing
(C) Version
year
Xxxxxxxxxxxxxxxxxx, Xxxxxxxxxxxxxxxxx
Manufactured by
XXXXX Xxxxxxxxxxxxxxxxxxxxxxxx (XX) - XXXX
MODEL TYPE MFG
Serial Number :
XXXXXXXXXXXXXX
(C) Serial (B) EC conformity
number
EN
label
User's manual