Navigation - Stiga Autoclip serie Bedienungsanleitung

Follow these instructions to navigate through the programming menu:
- "+" and "-": allows scrolling through the menu items in a cyclical manner or changing the value of the function displayed.
EN
- "ENTER": moves to the next menu level or confirms and memorises the value shown in the display and skips to the next
function.
- "PLAY/PAUSE": goes back to the previous menu level until exiting from the programming menu.
- "OFF": turns off the robot without confirming the last function displayed.
The menu has a tree structure. Follow the introduction summarising the programming functions available. A detailed explanation
of each function is found in the pages following the flow diagram.
Functions marked * are only available on some models. See "Technical Data" table.
Settings
Rain sensor
Auto setup (*)
Back to recharge
Schedule
Work Schedule 1
Work Schedule 2
Secondary areas
Second. Area 1
Second. Area 2
Second. Area 3 (*)
User's manual
robot's return to the charging station
Date
Time
Week
Determines the setting for a possible
Determines the setting for a possible

NAVIGATION

Determines the behaviour in case of
rain
Enables or disables the lawn mowed
recognition
Allows selecting the method for the
Sets the date
Sets the time
Allows programming the work days and rest days
Determines the first working time of the robot
Determines the second working time of the robot
Determines the setting for a possible
secondary area 1 indicating the size of
the area, the distance from the charging
station and the direction to reach it
secondary area 2
secondary area 3
22
Enable
Disable
Enable
Disable
Follow wire
V-Meter (*)
Percentage
Distance
Direction
Mode (*)