Before First Use; Using The Appliance; Control Knob - Philips HR2094 Bedienungsanleitung

Blender
Never fill the blender jar with ingredients that are hotter than
80cC.
To prevent spillage, do not put more than 1.5 litres of liquid in the
blender jar, especially when you are processing at a high speed. Do
not put more than 1.25 litres in the blender jar when you are
processing hot liquids or ingredients that tend to foam.
Never forget to place the sealing ring on the blade unit before
you assemble the blender jar, otherwise leakage will occur.
Always make sure the lid is properly closed and the measuring
cup has been inserted properly before you switch the appliance
on.
Filter
Never fill the blender jar with ingredients that are hotter than
80cC.
Never overload the filter. Do not put more than 125g of dried soy
beans or 150g of fruit in the filter at the same time.
Always make sure the lid is properly closed and the measuring
cup has been inserted properly before you switch the appliance
on.
Cut the fruit into smaller pieces before putting it in the filter.
Soak dried ingredients, such as soy beans, before putting them in
the filter.
Built-in safety lock
This feature ensures that you can only switch the appliance on when
the accessories have been placed on the motor unit in the correct
position.When the accessories have been assembled correctly, the
built-in safety lock will be deblocked.

Before first use

Thoroughly clean the parts which will come in contact with food
before you use the appliance for the first time (see chapter 'Cleaning').

Using the appliance

Control knob

Your blender is equipped with a special control knob with an
illuminated ring that lights up when the appliance is running.
You can set the control knob to any speed between MIN and MAX or,
even easier, use one of the three quick-select buttons: Smoothie, Ice
and Pulse.
ENGLISH
7