Blackmagic Design Pocket Cinema Camera 6K Installations- Und Bedienungsanleitung Seite 947

Group ID Parameter
1.0 Video mode
1.1 Gain (up to Camera 4.9)
1.2 Manual White Balance
1.3 Set auto WB
1.4 Restore auto WB
1.5 Exposure (us)
1.6 Exposure (ordinal)
1.7 Dynamic Range Mode
1.8 Video sharpening level
Video
1.9 Recording format
1.10 Set auto exposure mode
1.11 Shutter angle
1.12 Shutter speed
1.13 Gain
1.14 ISO
1.15 Display LUT
Type Index
[0] = frame rate
[1] = M-rate
int8
[2] = dimensions
[3] = interlaced
[4] = Color space
int8
int16
[0] = color temp
int16 [1] = tint
void –
void
–
int32
int16 –
int8 enum
–
int8 enum –
[0] = file frame rate
[1] = sensor frame
rate
[2] = frame width
int16
[3] = frame height
[4] = flags
int8
–
int32 –
int32
–
int8
–
int32 –
[0] = selected LUT
int8
[1] = enabled or not
Minimum Maximum
– –
– –
– –
– –
– –
1 128
2500 10000
-50 50
– –
– –
1 42000
0 n
0 2
0 3
– –
– –
– –
– –
– –
– –
– –
– –
– –
0 4
100 36000
Current
sensor 5000
frame rate
-128 127
0 2147483647
– –
– –
DeveloperInformation
Interpretation
fps as integer
(eg 24, 25, 30, 50, 60)
0 = regular, 1 = M-rate
0 = NTSC, 1 = PAL, 2 = 720,
3 = 1080, 4 = 2kDCI, 5 = 2k16:9,
6 = UHD, 7 = 3k Anamorphic,
8 = 4k DCI, 9 = 4k 16:9,
10 = 4.6k 2.4:1, 11 = 4.6k
0 = progressive,
1 = interlaced
0 = YUV
1x, 2x, 4x, 8x, 16x, 32x, 64x,
128x gain
Color temperature in K
tint
Calculate and set auto white
balance
Use latest auto white balance
setting
time in us
Steps through available
exposure values from minimum
(0) to maximum (n)
0 = film, 1 = video,
2 = extended video
0 = off, 1 = low, 2 = medium,
3 = high
fps as integer
(eg 24, 25, 30, 50, 60, 120)
fps as integer, valid when
sensor-off-speed set (eg 24,
25, 30, 33, 48, 50, 60, 120),
no change will be performed if
this value is set to 0
in pixels
in pixels
[0] = file-M-rate
[1] = sensor-M-rate, valid
when sensor-off-speed-set
[2] = sensor-off-speed
[3] = interlaced
[4] = windowed mode
0 = Manual Trigger, 1 = Iris,
2 = Shutter, 3 = Iris + Shutter,
4 = Shutter + Iris
Shutter angle in degrees,
multiplied by 100
Shutter speed value as a
fraction of 1, so 50 for 1/50th of
a second
Gain in decibel (dB)
ISO value
0 = None, 1 = Custom,
2 = film to video,
3 = film to extended video
0 = Not enabled, 1 = Enabled
947