Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
COMFORT TEMPERATURE SETTING:
Using the + and – button, you can increase or decrease the set temperature by steps of 1°C.
You can set your own desired temperature.
Close the doors of the room and wait several hours until the temperature stabilizes at the desired
value.
If the set temperature does not suit you, increase or decrease the value by steps of 1 °C.
Wait again a few hours to check the comfort temperature value.
Advise: We suggest you a reference temperature of 19 °C.
Signals through the pro-
Displayed symbols
Operation
grammer
Heating stops instantly
STOP
ECONOMY
Set back of 3,5°C below the comfort temperature
ANTI-FROST
Holds temperature at ~7°C to avoid frost damage.
ECONOMY OVERRIDE FACILITY:
For short-term absence (more than 2 hours), this mode helps you to save energy and heating costs.
This economic position will decrease the room temperature by 3.5°C compared to the chose n
comfort
temperature setting. To do this:
Press the MODE button until the display shows you the position "EC" (see picture).
It is possible to check the Economic setting by briefly pressing one of the two buttons + or -.
To change the "EC" temperature: press for 3 seconds on MODE and "EC" flashes.
The modification is possible using the + or - buttons.
Press the MODE button to validate.
ANTI-FROST
MODE:
«
»
For long-term absence (more than 24 hours), this mode helps to maintain the room temperature at
about 7°C. This en sures maximum savings without taking the risk of irreversible freezing damages.
To do this:
hors-gel
in French
Press the MODE button until the display shows the position "HG" (
i.e. Anti-Frost
).
HOW TO LOCK THE CONTROL BOX:
You have chosen, for example, the Economy mode, press the + and
- buttons simultaneously for approximately 3 seconds.
The flashing of the display indicates that the keypad is locked up.
Werbung
Inhaltsverzeichnis
