Ventilation Requirements; Operation; Control Panel - AEG ABB68811LS Benutzerinformation

rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.

3.4 Ventilation requirements

The airflow behind the appliance must
be sufficient.

4. OPERATION

4.1 Control panel

Power indicator light
1
Temperature regulator
2
FROSTMATIC light
3
FROSTMATIC switch and alarm reset
4
switch
4.2 Switching on
Connect the appliance to the main
power supply.
1. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up
and a sound will signal for 2 seconds.
1 2 3
min.
5 cm
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
4 5
Alarm light
5
If the temperature inside the
appliance is too high, the
Alarm light will blink and the
sound signal alarm will turn
on.
2. Push the FROSTMATIC switch and
the sound signal alarm will get off.
3. Push the FROSTMATIC switch once
again and the FROSTMATIC light will
light up. The appliance will start to
operate.
ENGLISH 21
2
min.
200 cm 2