HANSGROHE Unica'A 27820 Serie Montageanleitung Seite 39

Technical Data
Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Assembly
The mesh washer must be insert to protect the
overhead shower against incoming dirt by
pipework. Incoming dirt leads to defects or/and
can damage parts of the shower; such caused
faults voids all liability and guarantee claims.
Hansgrohe showers can be used together with
hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa in front of the shower fitting. In
this case don´t insert the Waterdimmer®.
11