Xiaomi Roborock 2 Handbuch Seite 11

Installation
6 Start cleaning
When the circular indicator light on the main unit changes from
slow blinking to stable, it means charging has completed. Briefly
press button or start cleaning through the mobile phone client.
7 Remove the mopping module
When the main unit is back on the dock charger after cleaning,
press the buckles on both sides by hand, drag and remove the
mopping module.
Note:
Please use moistureproof mat if you put the dock charger on wood floor
Remove tank when charging or not in use
Operating Instruction
Main brush
* Clean it every week as recommended
1. Turn over the machine, press the buckle and take off the cover.
2. Take out the main brush in an upwards movement and clean
the bearing of the main brush.
3. Use the matching cleaning tool of the main brush to cut off the
hairs entangled on the main brush.
4. Install the main brush, press tight the cover and fix the buckle.
Note: It is recommended to replace the main brush every 6-12 months
so as to ensure it cleans effectively.
9
Main brush cover
Buckle
Main brush
Bearing of the main brush