Xiaomi Roborock 2 Handbuch Seite 10

Installation
Add Device
2
Go to "My Device" page of Mi Home app and tap "+" on the
top right corner of the page to add a device. You could find
newly added device on "My Device" list
Reset WIFI
3
If anything is wrong with WIFI connection, you could try to
reset WIFI to default.
Open upper cover to check the WIFI indicator status next to
reset button. Press and hold the
hear the voice "Reset WIFI ". The resetting is completed when
the WIFI indicator starts to flash slowly and the cleaner will
enter a pending connection state.
5 Install the mopping module
Install the mopping cloth: Wet the
1
mopping cloth and wring it until it
doesn't drip.
Insert it into the bottom along the
slot of the water tank and stick it
firmly.
WIFI indicator light
Slow blinking: Waiting to connect
Fast blinking: Connecting
Stable light: WIFI is connected
Scan to download the APP
key and key until you
Fill the water tank: Open the tank lid, fill it with water, and put
2
back the tank lid.
Install the module: Push in the module along the bottom of the
3
main unit and follow the alignment mark on the mopping module.
A click sound means it is installed properly.
Note:In order to achieve a better mopping effect, it is recommended to use the main unit
to clean the floor three times before install the mopping module.
8