Safe Maintenance; Transporting And Unloading - Hamach HR 2400 Gebrauchsanleitung

• If skin or eyes have come into contact with the cleaning medium these must immediately be
rinsed with running water.
Before starting up the cleaner, the functioning of the safety facilities must be checked.
•
Before utilization get acquainted with the functioning of the control handles.
•
Before opening the lid, touch the metal in order to discharge any electrostatic charge. To
•
avoid electrostatic charging, connect the earth cable.
The spray gun cleaner should be installed in a well ventilated area away from electric
•
switches, sources of heat and sparks.
Regularly clean the work top and the air and smoke conduit.
•
Regularly replace the filter material at the back side of the work top.
•
Replace the filter cloth inside the main filter once every 2 weeks.
•
Replace the main filter once per month.
•
In case of extreme pollution this should be done more often.
•
The following measures should be taken in the room where the HR 2400 is placed before
operating the machine:
• Install suitable fire extinguishers including portable extinguishers. The fire extinguishers
should be kept in perfect conditions and be checked regularly according to local law and
regulations.
In case of an emergency the staff must be able to leave the installation room quickly and
•
easily.
It is prohibited to use water as an extinguisher. The burning materials can, when in contact
•
with water, form hazardous and possibly flammable gasses or quickly rise in temperature.
Warning! It is not allowed to use the HR 2400 machine without the self-adhesive plate on the
front of the machine. In case of damage to this self-adhesive plate it is obligatory to replace it
immediately.

SAFE MAINTENANCE

To assure safe maintenance of the HR 2400 please take into account the following instructions:
Turn off the water supply when carrying out repairs or maintenance.
•
Turn off the compressed air when carrying out repairs or maintenance.
•
Regularly check the safety facilities on being complete and functional.
•
Removing or manipulating safety facilities is prohibited.
•
Maintenance of the HR 2400 is to be carried out by qualified staff and according to the
•
instructions in this manual.
The symbols on the self-adhesive plate give indications of possible risks. The plate should be
•
kept clean and is to be replaced when (partially) damaged.
It is prohibited to use the machine when (one of) the symbols are not present on the front side.
•
Only original parts are to be used in repairs and maintenance.
•
Check if the earthing is sufficient (Earth cable supplied).
•

TRANSPORTING AND UNLOADING

The HR 2400 is sent in its own packing with "fragile" and "do not topple" written on it. The machine is
light enough to be handled by 2 persons.
31