HBM SB01A Montageanleitung Seite 5

SB01A
Remaining dangers
The scope of performance and supply of the Zener barriers covers only part of
the range of measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of measurement technique in such a way as to
minimize remaining dangers. Prevailing regulations must be complied with at
all times. There must be reference to the remaining dangers connected with
measurement technique.
Any risk of remaining dangers when working with the Zener barriers is pointed
out in this manual by means of the following symbols:
Symbol:
Meaning:
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
bodily injury.
Symbols pointing out notes on use and waste disposal as well as useful
information:
Symbol:
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com­
plies with the requirements of the relevant EC directives (the declaration of
conformity is available at http://www.hbm.com/HBMdoc).
A1020-4.0 en/de/fr
CAUTION
Potentially dangerous situation
NOTE
5
HBM