Troubleshooting - Silvercrest SOPE 650 A1 Bedienungsanleitung

Troubleshooting

PROBLEM POSSIBLE CAUSES
The press screw
control lamp
green/red.
All the ingredients have been
The appliance
processed; the funnel
has shut down
The appliance stops automatically
during operation.
after 1 minute as soon as all
ingredients have been processed.
The appliance has automatically
shut down due to overheating.
The appliance is not connected to a
mains power socket.
The mains cable
connected to the appliance.
The appliance has not been
assembled correctly, a safety device
has been triggered.
The appliance is
not working/
The appliance is still heating up.
cannot be
(The control lamp
switched on.
flashes red.)
The appliance has automatically
shut down due to overheating.
The
The appliance is damaged.
│ GB │ IE
■ 36
is blocked, the
flashes alternately
is empty.
is not
lights up or
button was not pressed.
POSSIBLE SOLUTIONS
Proceed as described in the
section "Removing a blockage".
Fill with ingredients if necessary.
Disconnect the plug and allow the
appliance to cool down.
Connect the appliance to a mains
power socket.
Plug the mains cable
mains connection in the motor
unit .
Check that the appliance is
assembled correctly.
Press the button – the
appliance starts automatically as
soon as it is sufficiently heated.
Disconnect the mains plug and
allow the appliance to cool down
sufficiently.
Press the button .
Contact the Customer Service
department.
SOPE 650 A1
into the