Disassembling The Appliance - Silvercrest SOPE 650 A1 Bedienungsanleitung

♦ Close the lock
go. You may have to wiggle the press screw housing
close the lock
♦ Fold the swivel arm
♦ Place the funnel
funnel
down the funnel
motor unit
♦ Place the lid
immediately. Place the lid
on the lid

Disassembling the appliance

WARNING!
► Parts of the appliance become hot during operation! Allow the appliance
to cool sufficiently before disassembling!
♦ Disconnect the mains plug from the mains socket and from the mains
connection
♦ Remove the lid
NOTE
► Make sure that there are no more ingredients in funnel
it from the appliance. The outlet of the funnel
♦ Tilt the funnel
lock
♦ Fold the swivel arm
♦ Hold the press screw housing
of the
the housing
♦ Pull the press screw
SOPE 650 A1
by pushing it in the direction of the
.
down to the stop.
on the appliance so that the outlet and the feet on the
are inserted in the appropriate holders in the motor unit
until it clicks audibly into place and is seated firmly on the
.
on the funnel
engages in the receptacle on the funnel
of the appliance.
from the funnel
slightly towards the swivel arm
. Then pull it upwards.
up to the stop.
symbol. Remove the screw press
.
out of the housing
if you do not want to use the appliance
on the funnel in such a way that the lock
.
is open!
firmly and slide the lock
from the mounting together with
.
symbol as far as it will
a little in order to
. Push
.
before removing
to release it from the
in the direction
GB │ IE │ 29 ■