Preparing the appliance
♦
If you have not already done so, carry out all the preparations as described
in the section "Preparations".
♦
Add the ingredients to be processed into the funnel
do not use more than 300 g of ingredients per pass to avoid overloading the
filter
♦
Place the lid
the lid
♦
Insert the plug into the mains power socket. You will hear a beep. If you hear
several beeps, the appliance has not been properly assembled. In this case,
check that the individual parts are seated correctly.
Starting the appliance
NOTE
►
You may hear some loud, squeaky operating noises, especially when
processing small, hard ingredients, such as chia seeds. This is normal and
is not an appliance fault. If the press screw
described in the section ""Removing a blockage"".
♦
Press the
the integrated control lamp
temperature, the heating process takes approx. 30 seconds.
NOTE
►
If no further input is made within 5 minutes, the appliance switches off
again automatically.
♦
Press the
If the appliance is already sufficiently heated, it will start immediately.
The control lamp
If the appliance is not yet sufficiently hot, the control lamp
It starts automatically as soon as the heating process is completed.
♦
Once all the ingredients have been processed, pause the appliance and,
if necessary, empty the filter
been done, you can add more ingredients.
│
GB │ IE
■
32
.
on the funnel
engages in the receptacle on the funnel
button
to switch on the appliance. The appliance heats up,
button
to start the appliance.
lights up green.
in such a way that the locking appliance on
.
blocks, proceed as
lights up red. Depending on the ambient
and the two containers
. We recommend you
flashes red.
. Once this has
SOPE 650 A1