Electrolux TW SL EEV Benutzerinformation Seite 62

62 electrolux
1. Remove middle polystyrene part by pull-
ing it.
Loosen polystyrene parts 3 and 4.
2. Lift slightly rack and take it carefully out
from the drum.
3. Remove right polystyrene part by pulling
it.
4. Remove left polystyrene part by pulling
it.
Electrical connection
Details on mains voltage, type of current
and the fuses required should be taken
from the type plate. The type plate is fitted
near the loading aperture (see "Product de-
scription" chapter).
Connect the machine to an earthed
socket, in accordance with current wir-
ing regulations.
Warning! The manufacturer
declines any responsibility for
damage or injury through failure to
comply with the above safety
precautions.
Should the appliance power supply
cable need to be replaced, this
must be carried out by our Service
Center.
Warning! The plug must be
accessible after installing the
machine.