Herunterladen Inhalt Inhalt Diese Seite drucken

BaByliss For MEN I.Q 929 Handbuch Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
ENGLISH
CLIppER
E929XDE/E929YDE
1. 2 motorised cutting guides
for continuous adjustment
'Red' guide = from 3 to 15mm
'Green' guide = from 18 to
30mm
2. 1 precision guide
5 positions (0.5 to 2.5mm)
3. Blades:
Moveable blade:
- Sharpened using 3D etching
process: for an exceptionally
sharp cutting edge.
- Long-lasting organic CARBON
HLD
(Hard
coating: ultra-hardwearing and
100% stainless steel blade.
Fixed Blade:
- Titanium coating: for longer
life.
These two technologies provide
perfect surface condition and their
combination is optimal for reducing
the friction coefficient.
4. Thinning function
5. ON/OFF switch
6. Cutting length adjustment
7. LED display of selected length
on graduated screen:
Red LED on the left scale
for the red guide (from 3 to
15mm)
Green LED on the right scale
for the green guide (from 18
to 30mm)
8. Charging indicator light
9. plug for use on the mains and
for charging
10. Cleaning brush
Like
Diamond)
ImpORTANT
REGARDING THE NI-mH BATTERIES
OF THIS UNIT
To obtain and maintain the longest
battery autonomy possible, allow
it to charge for 16 hours before
using it for the first time and
then approximately every three
months. Full autonomy of the unit
will only be obtained after three
complete recharge cycles.
CHARGING THE CLIppER
Before using the trimmer for the
first time, allow it to charge for 16
hours.
1. Connect the transformer to the
mains and the plug into the
unit. (Fig. 1)
2. Check
that
indicator light is lit and that the
switch on the trimmer is in the
OFF position.
3. A fully charged trimmer will run
for 30 minutes.
mAINS USE
Connect the transformer into the
mains, wait 1 minute and then
switch into the ON position.
IMPORTANT!
transformer
the E929XDE/E929YDE clipper
Voltage = 3V - Tension = 1000mA
USING THE CUTTING GUIDES
Very practical, the cutting guide
guarantees equal cutting length.
IMPORTANT: Always attach the
cutting guide BEFORE turning the
trimmer on, and turn it off before
changing the guide.
5
INFORmATION
the
charging
Use
only
provided
with
the

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

E929xdeE929yde

Inhaltsverzeichnis