Technical Features - Phonocar VM494 Bedienungsanleitung

VM494

Technical features

• 9.7" screen resolution 1280x480 pixels
• Width-adjustable front camera
• Viewing angle 144° also while recording
• FullHD video recording at 1080P
• Video formats: 1080P, MOV 30 FPS
• Recording cycle: 1/3/5 minutes
Multifunction rearview mirror with a built-in adjustable front camera and a rear camera equipped with câble for
15 m installation, DVR function with 1/3/5 minutes recording cycles, G-Sensor and 9.7" Full Screen with Touch Menu. It
fits on the original mirror of the vehicle, to provide a series of support and safety functions , when driving and parking:
1. DVR : Once turned on, the device starts recording even when the vehicle is stationary.
Recording in HD, both with front and rear camera.
2. G SENSOR Once activated and in case of collisions or impacts, it saves the footage of the event and preventing
overwriting and making it available in case of disputes.
3. Automatic Rear View: After connecting the reverse câble and when reverse gear is engaged, the rear camera is auto-
matically activated, displaying the images on the screen.
4. Auto power off: the screen automatically turns off after 1 minute of non-use to allow "traditional" use of the
mirror, while keeping the DVR function active.
Supplied
• 1 VM494
• 1 dedicated rear camera with 15 m cable
• 1 power câble 12V
• 2 rubber fixing brackets
• 1 user manual
Warning
Do not install the unit where it can limit the field of vision of the driver. Do not attempt to repair the unit yourself.
Assembly and repair must be performed by qualified technicians.
Note
You can move the front camera (integrated in the mirror) outwards for an easy and correct installation.
• Picture format: PG/TIFF/PNG
• Blue anti-glare glass with the screen off
• Rear camera with automatic visualization
activation when reverse gear is engaged
• Dimensions 7 x 25,5 cm
8
EN