Model assembly
Auxiliary fuel tank installation
1.Carefully apply foam safe CA to the base and side of
the auxiliary fuel tank pocket and place the oil tank into
the pocket.
Required Adhesives:
Medium CA
Antenna installation
1. Apply the foam safe CA to the antenna and place the
antenna into the slot as shown.
Required Adhesives:
Medium CA
05
Armament installation
1. Slide the bombs and rockets onto the rails.
Propeller and spinner installation
1. Assemble the propeller and spinner as shown below.
Note:The motor should rotate clockwise when viewing
the plane from the rear.
b
a
c
d