Washing Hints - Edesa LC-800 Installation, Gebrauch Und Wartung

STARTUP
Activate pushbutton 1 (Fig. 8, 9, 10). When the appliance is on, pilot light 3 will
stay on.
The filling and heating of the rinse water starts and then the wash water.
In models without temperature indicators (LC-800) pilot light 4 (Fig. 8) turns on
when reaching the washing temperature indicating that the machine is ready).
In model LC-1000 Y LC-1200, the machine is ready when thermometer 9 (Fig. 9,
10) indicates 55÷60 ºC and thermometer 8 (Fig. 9, 10) indicates 82÷90 ºC.
WASH PROGRAMME
Select the wash cycle with key 5 "Selec" (Fig. 8, 9, 10)
MODEL
LC-800
LC-1000
LC-1200
The cycle starts activating push button 6 (Fig. 8, 9, 10) or just lowering the cover.
Drainage
To totally empty the tub, remove the overflow (Fig. 15).
STOP
Press key 2 to turn the machine off

2.1.- Washing hints

Put the amount of detergent indicated by the manufacturer in the tub.
Control and maintain the rinse aid level and the pipe with its filter submerged.
Dish preparation
Remove the largest waste from the dishes before placing them in the baskets.
Wash the glasses first.
Place the plates in the plate racks as indicated in (Fig. 11).
Position the glasses upside down.
Place the cutlery in the cutlery baskets with the handles downwards. Mix the spoons
with the knives and forks.
Place the cutlery baskets in the lower baskets or the baskets with 16 holes (Fig. 11).
2.- USE
I - Short II - Normal
Fig. 5.1 Fig. 5.2
60 90
55 80
13
III - Intensive Continuous
Fig. 5.3 Fig. 8
180
120
NO
SI