Technical Specifications; Electrical Connection; Fig. 23 - Edesa LC-800 Installation, Gebrauch Und Wartung

1.1.- Installation diagram
Refer to Fig. 1
1.2.- Positioning
Level and adjust the height of the appliance. (Fig. 2)
1.3.- Water connection
It is carried out according to figures 3 or 4.
Dynamic pressure necessary during the rinse: 2 ÷ 4 kg/cm
pressures less than 2 kg/cm
For water harder than 10º dF, install a water softener.
1.4.- Drainage
e) Install the drainage hose as indicated in Fig.5.
f) Install a siphon pipe to prevent unpleasant odours.

1.5.- Technical specifications

Water
MODEL inlet
pressure
LC-800
2
2÷4 kg/cm
LC-1000
(28÷56psi)
LC-1200

1.6.- Electrical connection

Access the terminal strip (R), (Fig. 1 y 6), dismantling the front panel. Fix the cable
in the rear panel.
Connect the terminal strip according to figure 6.
Install a separate power switch in the mains socket (I) (Fig. 7) apart from the
appliance with distances between contacts of 3 mm or more.
The machine must be connected to earth.
All the models have the option to reduce the maximum absorbed power according to

Fig. 23

1.- INSTALLATION
2
, install an electric pressure pump. (Fig. 4).
Drainage Supply
Hose voltage
380-415V-3N
220-240V-3
ø30x ø25
220-240V-1N
(500 Hz)
Maximum absorbed power carrying out
MODEL
the connection according to Fig. 23 (W)
LC-800
LC-1000
LC-1200
2
Power(W)
Resistor
Drum Tub absorbed
6.000 11.100
9.000 4,500 14.700
12.000 17.700
6.600
10.200
13.200
12
(Fig. 3). With network
Basket Rinse
Max squared water
(mm) consum.(l)
500x500
Net
ht
weig
(kg)
108
3
116
118