Maintenance - Gmini Chilly GM1703 Gebrauchsanweisung

CLEANING AND MAINTENANCE RECOMMENDATIONS
This product requires regular maintenance. Cleaning and maintenaNce must only be made
by adult persons.
CLEANING
The stroller does not have removable textile covers. Use damp sponge and neutral soap for
cleaning the covers; observe the instructions on the label. Individual symbols ant their
meaning:
Do not wash. Do not bleach. No tumble drying. No ironing. No chemical cleaning.
Regularly clean plastic parts using clean and damp cloth. Clean metal parts exposed to
water and dry to avoid corrosion.

MAINTENANCE

Where required, lubricate movable parts using silicon oil. Regularly check the wheels for
wear, remove dust and sand. Remove dust, dirt and sand on movable plastic parts, fitted
on metal frame to avoid friction and, thus, correct function of the stroller. Keep the stroller in
a dry place.
GENERAL INSTRUCTIONS
UNFOLDING THE STROLLER
NOTE: Prior to unfolding the stroller be sure your baby/other babies are at a safe distance.
Look out movable parts of the stroller do not get in contact with the baby´s body.
1. Remove plastic clamp holder on the side of the stroller (Fig. 1).
2. Unfold the stroller by pulling front and rear wheels apart (Fig. 2).
3. Leave front wheels to fall freely down and pull the handles apart (Fig. 3).
4. Press the pedal (Fig. 4). Be sure the stroller has been completely unfolded and
secured. NOTE: Prior to use the stroller be sure it has been completely unfolded and
rear cross strut locked in place.
FITTING FRONT WHEELS
5. Slide the front wheel pair on the stroller frame and push until a click is heard (Fig. 5).
Fit the other wheel pair in the same way.
NOTE: Check correct fitting of the wheels prior to use the stroller by pulling the wheel pair.
Press the buttons below the wheels to release the wheels (Fig. 6) and remove the wheel
assembly. Remove the other wheel pair in the same way.
FITTING REAR WHEELS
6. Fit rear wheel assembly on the stroller frame as shown in Fig. 7, until a click is heard.
NOTE: Check correct fitting of the wheels prior to use the stroller by pulling the wheel
assembly.