Herunterladen Inhalt Inhalt Diese Seite drucken

Gmini Chilly GM1703 Gebrauchsanweisung Seite 19

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
ADJUSTING BACK REST
The back rest can be adjusted in 4 positions.
6. When the button on the back rest has been pressed, you can move the back rest to
required position; as soon as the button has been released, the back rest will be locked in
the nearest possible locking position (Fig. 16).
7. For lifting the back rest simply lift it to the position as required.
NOTE: These operations may require additional force if the baby is sitting in the stroller.
ADJUSTING FOOT REST
The foot rest can be adjusted in two positions, thus increasing baby´s comfort.
9. Press both side buttons at the same time as shown in Fig. 17A / 18A and adjust the foot
rest in required position. To lift the foot rest, simply push it up until a click is heard.
HOOD
4. For installation of the hood, attach plastic clamps on the frame (Fig. 12,13) and push onto
them until they fit to place. Fit the hood using velcro fasteners: wind the belt with velcro
fasteners around the frame above the seat and fasten velcro fasteners on the back side of
the seat and hood.
NOTE: This operation must be carried out on both sides of the stroller. Check correct fitting
of the hood.
Pull the front side of the hood forwards to unfold it and fix in position using side struts (Fig.
14A). To fold the hood, release side struts (Fig. 14B) first and then push the hood towards
the seat.
FOLDING THE STROLLER
NOTE: When folding the stroller, your baby and/or other babies must be at a safety
distance. Look out movable parts of the stroller do not get in contact with the baby´s body.
Be sure the shopping basket is empty.
18. If the hood is unfolded, fold it towards the back rest. Put the back rest to horizontal
position.
19. Pull the handle of the cross strut upwards (Fig. 19A), release the pedal on the right
side of the stroller (Fig. 19B) and start folding.
20. Push the handles of the stroller forwards until the stroller has been folded (Fig. 20).
21. Attach clamp holder on the side of the frame to avoid incidental unfolding. (Fig. 21A).
When folding the stroller, do not apply too much force. If any action requires inadequate
force, check whether there are not any obstacles and repeat the action.
RAIN PROTECTION
NOTE: Be very careful when having rain protection on the stroller.
NOTE: The rain protection must not be used without the hood, since the baby may suffocate
to death.
NOTE: When rain protection is put on, never leave the stroller on the sun, if the baby is in.
Danger of sunstroke!
Importer and distributor: Piccollo, s.r.o., Praha 8, Pobřežní 667/78
Made in China, in compliance with EN 1888:2012

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis