Herunterladen Inhalt Inhalt Diese Seite drucken

WMF Bueno Digital Gebrauchsanweisung Seite 9

Vorschau ausblenden Andere Handbücher für Bueno Digital:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
▪ Caution. The appliance becomes very hot. Risk of scalding due to
emerging steam. Never swing out the filter or open the cover while
brewing is in progress.
▪ This appliance is not intended to be used by persons (including
children) with limited physical, sensory or intellectual faculties or
who lack experience and/or knowledge, unless they are supervised
by a person responsible for their safety or have received instruc-
tions on how to use the appliance.
▪ Please make sure that children do not have an opportunity to play
with the appliance.
▪ If you do not intend using the appliance for an extended period,
pull the power plug.
▪ If the following happens, do not use the appliance and unplug it
immediately:
the appliance or power cable are damaged
a defect is suspected after a fall or similar occurrence
In these cases, have the appliance repaired.
▪ Do not leave the appliance to run unattended.
▪ The appliance must be decalcified regularly.
▪ The glass pot is not suitable for use in microwave ovens.
▪ Never immerse the appliance in water.
▪ We will not accept any liability for damages resulting from misuse,
non-compliance with the decalcification instructions, or unquali-
fied repairs. Also, guarantee services are excluded in such cases.
▪ If the power cable of the appliance is damaged, it must be replaced
by the manufacturer's authorised service agent or a qualified
technician. Incorrect repairs may result in considerable hazards for
the user.
Start-up
Prior to initial use or when the automatic coffee maker has not been
operated over a long period, fill the appliance with the maximum
amount of water but without coffee powder, let the water boil and
finally rinse the filter and pot with hot water.
Set current time
After plugging the plug into an outlet, the display shows "12:00".
Press the Prog key. The display shows "CLOCK" and the colon of
"12:00" is blinking. You can now set the current time by pressing the
h and min keys. When "CLOCK" disappears from the display, the clock
is running. Confirmation is not required.
Note: The time must be reset after a power failure or after the plug
was disconnected.
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis