AEG S83200CMB1 Benutzerinformation Seite 51

1
2
A
B
E
F
C D
• Remove the door end cap cover.
• Take out the cable from the door end
cap and place it into the upper hinge.
• Connect the cable to the connecting
point in the front panel to the corre-
sponding side.
• Put back the hinge cover and the top
front covers.
• Place the display cable, which is cur-
rently disconnected, into the cable
holder in the door end cap.
• Put back the door end cap covers. (2)
• Remove the cover with the help of a
tool (A).
• Unscrew the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
• Re-insert the cover (A) on the opposite
side.
• Place the door on the lower hinge.
ENGLISH
51