System Requirements; Specification - i-tec ADVANCE Serie Gebrauchsanweisung

i-tec USB 3.0 Charging HUB 7 Port
INTRODUCTION
The HUB is an ideal companion for everybody who does not have enough USB ports in his/her notebook,
ultrabook or PC and who has to constantly connect and disconnect his/her favorite USB equipment such as
flash disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
This HUB offers 7 USB 3.0 ports with the Plug & Play function and standard USB charging – the HUB will
automatically detect connected equipment for USB charging. The two ports placed next to the LED also
supports charging according to specification BC 1.2, e.g. for the iPads or Samsung tablets. The USB
3.0 interface is important mainly for data transfers from USB 3.0 memory cards and flash disks which will
use its high transfer speed most.
The advantage is included external power adapter which you can use for backing up data on external
hard drives or for connecting high power consumption devices which are powered directly from the USB
port.
This HUB does not require installation of drivers. You will just connect it by the USB cable to your
computer and immediately you can start using it. This HUB has a built in overcurrent protection of your
computer in case of short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.
INSTALLATION IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 AND HIGHER, MAC OS X AND HIGHER, LINUX
The HUB is installed automatically, no need install drivers. Connect the connector of the power adaptor to
the HUB and connect the power adaptor to a socket outlet with 230V. Then plug the HUB via USB cable into
available USB port (USB 3.0, 2.0 or 1.1 standard) of your notebook / PC and follow the on-screen
instructions. The HUB will be installed and displayed in Device manager as "Generic USB Hub" and
"Generic USB SuperSpeed Hub". Using of 7 port HUB is possible only with power adapter.
CHARGING
You can use external power adapter, if you connect printer, scanner or other high power consumption
devices to USB ports in HUB (power adapter is included). Respect the basic rules while using this power
adapter (for ex. do not let in reach of children, if the adapter is in 230 V circuit, do not put it into the water and
so on).
CHARGING
The HUB supports charging of the connected USB mobile equipment such as smartphones (including
iPhone and Samsung phones), e-book readers, multi-media players, GPS navigators, and tablets (e.g.,
Asus, Toshiba, GoClever, Prestigio, Emgeton, Sencor). Using the original cable connect the equipment to
be charged to the USB port of the HUB. At the same time the power adaptor needs to be connected to the
HUB as well. Charging of iPads or Samsung tablets is possible only through two USB ports placed next
LED.

SYSTEM REQUIREMENTS

Hardware requirements
Notebook / PC with one available USB port
Operating system
Windows XP, Windows Vista, Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit, Windows 10
32/64bit, Mac OS X 10.x or higher, Linux

SPECIFICATION

7x USB 3.0 port for connecting USB equipment, of which 2x USB 3.0 port for charging as per the
Ÿ
EN
05