System Requirements; Product Overview; Driver Installation - i-tec USB-C Slim HUB 3 Port + Gigabit Ethernet Adapter Gebrauchsanweisung

SYSTEM REQUIREMENTS



Note:
Prior to installing the USB-C, make sure that there are (for the USB-C 3.1 controller in the laptop/PC)
installed the latest drivers for it. In case of outdated USB-C drivers problems during installation or use
may occur.
Installing the USB HUB (USB 3.0 ports type A) is automatic from the system. This HUB will be
automatically detected and installed immediately after connecting to the USB port on your laptop / PC
or PCIe expansion card with internal USB 3.0 host controller.
Before first connecting install the LAN port and then connect to the device. Current drivers are
available on our website

PRODUCT OVERVIEW

1. Cable with USB-C connector
2. 3x USB-A 3.0 port
3. RJ-45 port

DRIVER INSTALLATION*

*The driver version is subject to change due to the driver updated.
Note: DO NOT connect the device to your computer before completing the installation of driver!
Downloaded from www.Manualslib.com
Hardware requirements: laptop / tablet / PC with free USB-C port.
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, Mac OS X, Linux, Android.
www.i-tec-europe.eu
manuals search engine
in the "Download" section for this product.