Fire Safety - Kirami Original Easy Gebrauchsanweisungen

The bottom of the stove has a grate bed with one grate in place and a spoiler
on the top shelf behind which the flames go to the chimney. These should
always be in place when using the stove. (Picture on left)
Water discharge
The water discharge is the pipe on the opposite side of the stove
with a shut-off valve or a hat. Plan the location of your tub in such a
manner that the water discharge does not cause any problems.
Guide the water to the side with hoses.
Lift the tub up to connect the valve (picture on right) to fit the
valve. Use pipe tape on all pipe thread connections in case the
connection does not have any sealing. Check the tightness of
the outer circle regularly so that the inner sealing will not
when running the chimney through the roof, the end of the insulated chimney needs to be one
metre above the roof. Pay attention to the fire safety of the hearth in stoves of normal furnaces
(CULT), there cannot be any inflammable material. In practice, the area needs to be as indicated in
the picture, and the material needs to be concrete, sand, or a metal plate. Ask more from a local fire
authority.
INSTRUCTIONS FOR USE: Original Easy, for hot tubs
leak.
In case the tub is placed nearby buildings,
e.g. the edge of a terrace, ensure that the
chimney is located away from flammable
materials. Remember to check the
distance both sideways and vertically to
avoid the risk of fire. The distance should
be three metres sideways away from any
flammable material. A smaller dimension
is sufficient for the chimney. In case the
chimney is closer, use a separately
insulated chimney. When near a roof or
21/60

FIRE SAFETY

3 / 8