Using The Appliance - Heinner HVC-E700GR Bedienungsanleitung

www.heinner.com
Floor nozzle settings for carpets and tiled, wood-block or similar floors:
A: hard floors – brush bar extended
B: carpets – brush bar retracted
VI. USING THE APPLIANCE
VACUUM CLEANING
1. Before using the device first roll out a sufficient length of electric flex cable and
plug into the mains socket. The yellow mark on the electric flex cable is the
maximum length that must not be exceeded. To switch on the device press the
foot pedal button
2. To rewind the power cable, press the button
cable with the other hand to ensure that it does not whip causing damage.
REGULATING THE SUCTION POWER
You can set the suction power on the device individually as you require it using the
suction regulator. We recommend using minimum suction power for delicate
materials.
Select medium suction power for mattresses, upholstered furniture and carpets.
Select maximum suction power for tiled, wood and other robust floors.
on the casing with your foot.
700W, 230V~50Hz
with one hand and guide the
2