www.heinner.com
V.
ASSEMBLING THE VACCUM CLEANER
1. Assembly and disassembly of the tube
Montage – insert the tube in the air intake opening. Push the tube in until it
locks in place.
Disassembly - take the tube from the air intake after disconnecting from the
mains socket.
2. Assembling the telescope tube and accessories
Remove the telescope tube from the hand grip.
Set the telescope tube to the correct length.
Push the telescope tube slide forwards and pull out the lower part of the
tube to the extension length required. Then simply let go of the slide and let
it snap into place.
Fix the floor brush to the telescope tube.
Suitable for everyday cleaning of the carpet and of wooden floors.
Cleaning carpet
700W, 230V~50Hz
Cleaning wooden floor
1