Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hazards / Risks
1.
Electric shock. The model is equipped with fan motors
and electric defrost heaters. It is important to use elec-
trical safety systems that are in compliance to the re-
gulations in force.
2.
Burns. The surface of the electric defrost heaters can
reach the temperature of 350 °C
.
3.
Cuts. The heat exchanger is made with fins with sharp
edges and the casing is made of sheet metal parts.
4.
Parts in motion. The model is equipped with fan motors
fitted with external protection.
5.
Crushing. The weight of unit may exceed 70 kg.
Instructions for a correct installation
SOLO 25 XS - Model with ø 250 mm fan motor
Minimum distance from wall on heater side
SOLO 31 XS - Model with ø 315 mm fan motor
Minimum distance from wall on heater side
During the installation phase observe the minimun dimension A+250 mm to
allow an adequate space for the removal and fitting of heaters.
18
www.profroid.com
Reference standards
-
MACHINES DIRECTIVE 2006/42/EC
-
LOW-VOLTAGE DIRECTIVE 2014/35/UE
-
ELECTROMAGNETIC COMPATIBILITY DIR. 2014/30/UE
-
PED DIRECTIVE 2014/68/UE
-
ERP DIRECTIVE 2009/125/EC
Minimum distance from wall on fan motor side
Minimum distance from wall on fan motor side
During the installation phase observe the mini-
mun distance of 100 mm from wall on fan motor
side to allow proper access to the unit.
During the installation phase ob-
serve the minimun distance of
100 mm from wall on fan motor
side to allow proper access to
the unit.
Werbung
Inhaltsverzeichnis
