EINHELL BT-KF 150 Originalbetriebsanleitung Seite 26

4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the correct tool for your work. You will
be able to work better and more safely within the given performance boundari-
es.
b) Do not use an electric tool with a defective switch. An electric tool that can-
not be switched on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the battery before making
any adjustments to the appliance, changing accessories or put the appli-
ance down. This safety measure prevents starting the electric tool unintentio-
nally.
d) Keep unused electric tools out of the reach of children. Do not allow peo-
ple who are not familiar with the appliance or who have not read these
instructions to use the appliance. Electric tools are dangerous if they are
used by inexperienced people.
e) Clean your electric tool carefully. Check whether moving parts are func-
tioning properly and not jamming, whether parts are broken or damaged
enough that the functioning of this electric tool is aff ected. Have dama-
ged parts repaired before using the appliance. Many accidents are caused
by badly maintained electric tools.
f) Keep your cutting tools sharp and clean. Carefully maintained cutting tools
with sharp cutting edges will jam less and are easier to control.
g) Make sure to use electric tools, accessories, attachments, etc. in ac-
cordance with these instructions. Take the conditions in your work area
and the job in hand into account. Using electric tools for any purpose other
than the one for which they are intended can lead to dangerous situations.
h) Hold the equipment by the insulated handles because the grinding/san-
ding belt may strike the equipment's own power cable. Damaging a live
cable may make the metal parts of the equipment live and cause an electric
shock.
i) Hold the electric equipment only by the insulated handles because the
cutter may strike the equipment's own power cable. Contact with a live
cable might also make the metal parts of the equipment live and cause an elec-
tric shock.
5. Service
a) Have your electric tool repaired only by trained personnel using only ge-
nuine spare parts. This will ensure that your electric tool remains safe to use.
Special safety information
• This tool may be used only for dry grinding/sanding operations.
• Always guide the power cable away from the back of the tool.
• Use on materials containing asbestos is prohibited.
•
Always remove the plug from the power supply socket before carrying out any
work on the machine (cleaning the sander, changing the sandpaper, etc.).
Anl_BT_KF_150_SPK7.indb 26 Anl_BT_KF_150_SPK7.indb 26
GB
- 26 -
23.06.2016 09:28:58 23.06.2016 09:28:58