Symbol 68XX-Serie Bedienungsanleitung Seite 17

Q u i c k
Symptom
Low Battery
message. (contin-
ued)
Battery is dead.
Cannot see charac-
ters on display.
Scanner does not
decode a bar code.
Double Key error
message displays.
68XX does not re-
spond when keys
are pressed.
R e f e r e n c e
Possible Cause
The main battery pack
is running low. (contin-
ued)
Battery not replaced
after receiving Low
Battery message.
68XX not powered on.
Battery pack is missing
or dead.
Contrast not adjusted
properly.
The bar code is
unreadable.
Scan window is dirty.
Two or more keys were
pressed at the same
time.
Application was not
successfully download-
ed.
15
Action
Lithium Ion battery - Re-
move the battery from the
68XX and charge in a
UBC 2000 adapter.
OR
Power the 68XX off and
replace the battery.
Replace the battery.
PWR
Press the key.
Replace or recharge the
battery pack.
Refer to page 7 for the
key sequence.
Verify that the bar code is
not defective, e.g.,
smudged or dirty.
Clean scan window with
lens tissues for use with
eyeglasses. Do NOT use
tissues with lotion.
Press keys in sequence.
Ask System Administra-
tor to repeat application
download.