Symbol 68XX-Serie Bedienungsanleitung Seite 14

Communicating with a Printer
The 68XX communicates with a printer through the printer
interface module (PIM). To connect the 68XX to the printer:
1. Attach the PIM's optical connector to the 68XX's port by in-
serting the clips on the connector in the slots on either side of
the port.
Optical Connector
2. Plug the PIM's DB-9 connector in the printer's port.
3. Power the printer and 68XX on.
Communicating in a RF Network
The PDT 6810 operates in a Symbol Spectrum One RF network; the
PDT 684X operates in a Symbol Spectrum24 RF network.
The Status LED indicates the state of the terminal's connection to
the RF network:
Off
Flashes red
once per
second
Refer to the documentation for the Spectrum One or Spectrum24
network for more information on operating the PDT 68XX in that
RF environment.
6 8 X X
PIM
68XX's
Optical Port
indicates that the radio is working and associated with an
access point (Spectrum24) or base station (Spectrum
One).
to indicate that the radio is out of range or not associated
with an access point or base station.
S e r i e s
Clips
12
Slots