Switching On The Appliance; Observe Ambient Temperature And Ventilation; Selecting The Temperature - Siemens KA..N Gebrauchs- Und Aufstellanleitung

en
Installation
Installation location
Basic model
Model with dispenser
Model with home bar
Installing and connecting
the appliance
Have a technician install the
appliance and connect it to the
water supply according to the
enclosed installation instructions.
26
Electrical connection
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indica
ted voltage and current type corres
pond to the values of your mains
supply. The rating plate is situated
in the bottom left hand side of the
appliance. The power cord may be
replaced by an electrician only.
Warning!
!
Never connect the appliance to
electronic energy saver plugs
104 kg
(e.g. Ecoboy: Sava Plug) or to
113 kg
power inverters which convert the
direct current to 230 V alternating
115 kg
current (e.g. solar equipment,
power supplies on ships).
Observe ambient
temperature and
ventilation
Climatic class
SN
N
ST
T
Ventilation
Switching on
the appliance
S
Note:
Selecting the
temperature
Appliances with control
panel
S
Permitted ambient
temperature
+10 °C to 32 °C
+16 °C to 32 °C
+18 °C to 38 °C
+18 °C to 43 °C
4 °C
19 °C