Securing And Routing System Cables; Supported Video Display Modes And Refresh Rates; Configuring The Display Settings - 3M MicroTouch C1500SS Installationsanleitung

7
4. Plug the AC power cord into the FPD. Alternately, you can use the optional power
supply from 3M.
5. Connect the power cable.

Securing and Routing System Cables

Secure all cable connections:
 Tighten all cable screws.
 Route all wiring and cabling away from heat sources, sharp metal edges and
electromagnetic and radio frequency interference.

Supported Video Display Modes and Refresh Rates

Your video card must support one of the display modes specified in Table 1. If you select
an unsupported video mode, the display will stop working or display an unsatisfactory
picture quality.
Table 1. Applicable Display Mode and Refresh Rate
Display Mode
VGA (640 x 480)
SVGA (800 x 600)
XGA (1024 x 768)
Table 2. Frequency Range
Mode
Normal

Configuring the Display Settings

After you connect your C1500SS and turn on your computer, you may need to configure
one or more of these display settings. The ideal settings for these displays are:
 Display mode (also called desktop area or video resolution) 1024 x 768
 Refresh rate (also called vertical scan rate or vertical sync) 60 Hz
 Color depth (also called color palette or number of colors) at least 16-bit (high color)
TSD-30219
3M™ MicroTouch™ Display C1500SS Installation Guide
Refresh Rate (Hz)
50
60
75
50
56
60
75
50
60
75
Frequency Range
Horizontal 20-60 kHz
Vertical 50-75 Hz
Rev F