Display Brightness; Zoom Function; Customising The Display; Switching To Black And White Display - Parkside PKIK 4.3 A1 Bedienungs- Und Sicherheitshinweise

PARKSIDE PKIK 4.3 A1

6.5.3 Display brightness

You can use the Display brightness button [6] to adjust the brightness of the
display [1]. Pressing this button multiple times will stepwise increase the display
[1] brightness. There are 9 adjustable levels. Once the highest level has been
reached, pressing the Display brightness button [6] again will reset the
brightness to the lowest value. The value will be reset to the default if you
power the camera off and back on.

6.5.4 Zoom function

You can use the Zoom button [8] to enable the zoom function. Press this button
to increase the zoom stepwise. There are two zoom levels (1.5X and 2.0X)
available. Once the highest zoom level has been reached, pressing the Zoom
button [8] again will disable the zoom. The value will also be reset to the
default if you power the camera off and back on.

6.5.5 Customising the display

Press and hold the Display brightness button [6] for approx. 2 seconds to
customise the display. The camera picture can be rotated by 180° and it can
be mirrored horizontally and vertically. This setting allows you to show the
recordings in four different views. If you change the setting and then power the
camera off and back on, the picture display will be reset to the default value.

6.5.6 Switching to black and white display

Press and hold the Zoom button [8] for approx. 2 seconds to toggle the
display between black and white, and colour. The function will be reset to
colour display if you power the camera off and back on.

6.5.7 Capturing a picture

Press the Record button [3] to take a picture. The captured picture is shown on
the display [1] for about 2 seconds. Then the display [1] shows the live picture
14 - English