Assembly - Klarstein Whisperwind Wireless Bedienungsanleitung

EN
20

ASSEMBLY

Installation of the protective grilles
• Mount the front guard grille as shown in the Device
Overview and then rotate it clockwise to bring the
positioning point into a vertical position.
• Tighten the screws to complete the installation.
Installing the Base
Place the connecting tube on the base. Insert the Allen screw
M6 into the base from below and tighten the screw clockwise
with the Allen wrench.
Installing the Power Supply
• Plug one side of the power cord into the rectangular connector on the base of the
unit.
• Plug the power plug at the other end of the power cord into the wall outlet. A beep
will sound as soon as the unit is connected.