Werbung
►►1. INFORMATION ON SAFETY
en
This series of warm air heaters is particularly suited
to heating closed areas, such as warehouses, shops
it
and homes. These heaters comply with the current
European directive.
de
IMPORTANT: You are required to read and
understand this operational manual prior to
es
assembling, starting up or conducting maintenance
on this heater. Using the heater incorrectly can
fr
cause serious injury. Keep this manual for future
nl
reference.
IMPORTANT: This heater is not suitable for use
pt
by persons (including children) with reduced
physical, sensory or mental capacities or with lack
da
of experience or knowledge unless supervised
by a person responsible for their safety. Children
fi
must be supervised to make sure they do not play
with the heater.
no
IMPORTANT: In order to prevent any risk, even if
sv
power supply mains disconnection is foreseen,
all cleaning, maintenance and repair operations
pl
requiring access to dangerous parts (e.g. replacing
the damaged power supply cable), must be carried
ru
out by the manufacturer, its technical assistance
service, a person with similar qualification.
cs
IMPORTANT: Comply with all local legislation and
hu
current regulations when using the heater.
►1.1. Appliances used near tarpaulins, curtains or
sl
other similar covering materials must be at a safe
distance. It is advised to use fire-proof covering
tr
material.
►1.2. Keep the heater a safe distance from humidity,
hr
water and atmospheric agents to prevent serious
damage to the heater.
lt
►1.3. Keep the hot parts of the heater a suitable
distance from inflammable or thermolabile materials
lv
(including the power supply cable).
►1.4. Never move, handle, refuel or conduct
et
maintenance on the heater when it is hot, connected
to the mains or in operation.
ro
►1.5. Avoid fire hazards by placing the hot or
functioning heater on a steady level surface.
sk
►1.6. Keep animals a safe distance from the heater.
►1.7. Power on the heater only with a current which
bg
has the voltage and frequency values specified on
the heater's identification plate.
uk
►1.8. Make sure the heater is only connected to
suitable mains with a differential switch and suitable
bs
earthing.
►1.9. If the power supply cable is damaged, it must
el
be replaced by a technical support centre to prevent
any risk.
zh
►1.10. Disconnect the heater from the mains power
supply when not in use.
►1.11. Always disconnect the heater from the mains
if temporarily left in unsafe conditions and make sure
it cannot be used.
►1.12. Never block, not even partially, the heater's
air vent (rear) or the air outlet (front).
►1.13. Only use original ducting kits to direct the air
(where applicable).
►1.14. Do not cover the heater while in operation, it
might overheat.
►1.15. Ask the technical support service to check
that the heater is working properly at least once a
year and/or as required.
THE MANUFACTURER DECLINES ANY LIABILITY
FOR DAMAGE/INJURIES TO PROPERTY/PERSONS
DERIVING FROM IMPROPER USE OF THE HEATER.
ONLY SPECIALISED PERSONNEL AUTHORISED
BY THE MANUFACTURER CAN PERFORM WORK
ON THE HEATER.
►►2. UNPACKING
WARNING: The packaging material is not a toy.
Keep the plastic bag out of the reach of children;
danger of suffocation!
(Pic. 1)
►2.1. Remove all packaging material used to deliver
the heater and dispose of it in compliance with current
standards.
►2.2. Extract all articles from the packaging.
►2.3. Check for any damage undergone during transport.
If the heater appears damaged, immediately inform the
dealer from whom it was purchased.
►►3. ASSEMBLY
(Pic. 2-3-4)
Some models can be fitted with wheels, handles and
supports. These parts, which come with the relative nuts
and bolts, are in the heater's packaging and must be
assembled before the product is turned on.
THE POWER SUPPLY CABLE MUST ONLY BE
INSTALLED BY SPECIALISED AND AUTHORISED
PERSONNEL WITH COMPONENTS THAT COMPLY
WITH LOCAL AND/OR NATIONAL ELECTRICAL
DIRECTIVES. THE MANUFACTURER DECLINES ANY
LIABILITY FOR DAMAGE/INJURIES TO THE HEATER
AND/OR PERSONS DERIVING FROM INCORRECT
CONNECTION OF THE POWER SUPPLY CABLE.
►►4. CONTROL PANEL
(Pic. 5)
1. Blocked heater indicator;
2. "RESET" button;
3. Room thermostat knob;
4. Room thermostat plug;
5. ON light;
6. Power selector.
►►5. OPERATION
WARNING: You are required to read, understand
and follow the "INFORMATION ON SAFETY'' before
starting the heater in order to use it correctly and
avoid risks.
WARNING: Make sure the power supply cable is
intact and that the features of the mains power
supply match the ones on the heater's technical
data plate.
Werbung
