Roadstar RU-695D+BT Bedienungsanleitung Seite 8

3 English
PRESET
There are 6 x 3 (FM1, FM2, FM3) presets available for FM and 6 x 2 (AM1, AM2)
presets for AM.
1. Set the desired radio station frequency as explained previously;
2. Press and hold the [PRESET] button (12 to 17 of the remote).
To Recall a preset station press the [PRESET] button (12 to 17).
BLUETOOTH OPERATION
1. Select "BT" mode by by pressing repeatedly the [MODE] knob (4);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "RU-
695D+BT";
3. You can now transfer the music to the RU-695D+BT.
Note: Music control (play, pause, etc) must be done from your external device.
ANSWER A PHONE CALL:
To Answer a phone call when your device is connected to the Speaker, press the
[ANSWER] button (5). To hang up the phone call press the [HANG UP] button (4).
USB OPERATION
1. Plug an USB stick into the [USB PORT] (8);
2. Playback will start automatically from the first track.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
•
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
•
The USB port is not designed for charging smartphones or other devices.
•
TF OPERATION
1. Plug a micro SD (TF) card into the [TF PORT] (9);
2. Playback will start automatically from the first track.
REPEAT - RANDOM MODE
During playback, press repeatedly the [REPEAT] button (14) to select:
REP-ONE: The current track is played repeatedly.
•
REP-DIR: The current folder is played repeatedly.
•
REP-ALL: All tracks are played repeatedly.
•
Or press repeatedly the [RANDOM] button (15) to enable/disable random playback.
AUX-IN OPERATION
1. Select "AUX" mode by pressing repeatedly the [MODE] button (4);
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the [AUX-IN SOCKET] (7).
Note: Music control (play, pause, etc) must be done from your external device.