Roadstar RU-695D+BT Bedienungsanleitung Seite 6

1 English
LOCATION OF CONTROLS
1. POWER ON - OFF / MENU / ENTER / VOLUME KNOB
2. TUNE - / SKIP -
3. TUNE + / SKIP +
4. MODE / HANG UP PHONE CALL
5. BAND SELECTOR / AMS-AUTOMATIC SCAN / ANSWER PHONE CALL / INFO
6. CLOCK
7. AUX INPUT
8. USB PORT
9. TF CARD PORT
10. DISPLAY
11. EQUALIZER
12. PRESET 1 / PLAY-PAUSE
13. PRESET 2 / INTRO
14. PRESET 3 / REPEAT
15. PRESET 4 / RANDOM
16. PRESET 5 / -10 TRACKS / PREVIOUS FOLDER
17. PRESET 6 / +10 TRACKS / NEXT FOLDER
18. MUTE
PRECAUTIONS
INSTRUCTIONS - All the safety and operating instructions should be read before
•
the radio is operated. The manual should be retained for future reference.
HEED WARNINGS - All warnings on the appliance and in the operating instruc-
•
tions should be adhered to.
WATER AND MOISTURE - The appliance should not be used near liquids or in
•
rooms with a high level of humidity.
VENTILATION - The appliance should be situated so that its location or position
•
does not interfere with its proper ventilation.
HEAT - The appliance should be situated away from heat sources such as radia-
•
tors, stoves or other appliances that produce heat.
POWER SOURCE - The radio should be connected to power supply only of the
•
type described in the operating instructions or as marked on the appliance.
POWER CORD PROTECTION - Power supply cord should be routed so that it is
•
not likely to be walked on or pinched by items placed upon/against them.
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
•
and liquids are not spilled into the enclosure through openings.
SERVICING - The user should not attempt to service the appliance beyond that
•
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel.
Note: If the display does not function properly or no reaction to operation of any
control may due to the electrostatic discharge. Switch off and disconnect the AC cord
then turn the power back on after a few seconds.