Disc > Format; Disc > Finalize - TechLine DVRC 800 Bedienungsanleitung

DF-H3F12S-RL-W(GB) 2007.9.10 12:52 PM
Disc > Format
If you load a completely blank disc to the DVD
Recorder + VCR, the recorder will initialize the disc
to DVD+VR mode.
Also, you can reformat the DVD-RW/DVD+RW from
the Setup menu as below.
• If you want to change the disc format,
everything recorded on the disc will be
erased.
• While disc is initialized, the red disc mark
appear on TV screen.
1 Press [SETUP].
2 Use [.../†] to select 'Disc'.
3 While 'Disc' is selected, press [.../†] to select
'Format'. And press [ENTER].
4 Press [ENTER] to start formatting the disc.
Disc
Disc
30
˘ ` 30 mac001
Format DVD+VR
†
Finalize
Protect
Disc Label
Disc Info
Confirm Back Exit
ENTER MENU SETUP
Format DVD+VR
†
Finalize
Protect
Disc Label
Disc Info
ENTER Confirm MENU Back SETUP Exit
Format
Formatting DVD, please wait...
80%
1200DPI 100LPI
Disc > Finalize
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
[MENU].
Once you have finalized a DVD-R and DVD+R
disc, you cannot edit or record anything else on
that disc except DVD+RW. However, you can
record and edit a DVD-RW disc by choosing
'Unfinalize' option.
1 Press [SETUP].
2 Use [.../†] to select 'Disc'.
3 While 'Disc' is selected, press [.../†] to select
'Finalize'. And press [ENTER].
4 The Finalize menu will appear. Select 'OK' and
press [ENTER].
The recorder starts finalizing the disc.
Disc
Format
Finalize
Protect
Disc Label
Disc Info
Confirm
ENTER MENU
Finalize/Unfinalize
Do you want to finalize this disc?
OK
Finalizing disc, please wait...
Setup menu
†
Back Exit
SETUP
Cancel
Finalize/Unfinalize
80%