Charging The Rechargeable Battery Pack - Sony mv-700hr Bedienungsanleitung

3
Adjust the depth positioning of the
sliding part of the installation kit
according to the thickness of the
headrest, and tighten the screws.
If necessary, loosen the knob and adjust
the angle of the installation cradle. Once
adjusted, tighten the knob firmly.
knob
Note
The backside of the installation cradle should
be as close as possible to the headrest to
prevent the monitor from vibrating during
driving.
If the headrest is thick, take out the
screws, slide out the part of the
installation kit and retighten the screws.
Replace the headrest to the seat.
4
Slide the player on the cradle until you
hear the click sound.
Removing the player from the
installation cradle
Remove the player while pressing the button
on the installation cradle.
Push to release
Using the rechargeable battery
pack
Attach the rechargeable battery pack as
illustrated below.
Slide up the rechargeable battery pack until
you hear the click sound.
Removing the rechargeable battery
pack from the player
Push the release button on the rechargeable
battery pack and slide it off.
Charging the rechargeable battery
pack
Charge the rechargeable battery pack using AC
power adaptor and AC power cord. You can
charge the rechargeable battery pack while it is
attached to the unit.
AC power adaptor
(supplied)
To a wall
AC power cord (supplied)
outlet
Rechargeable battery
pack MV-100BAT
(not supplied)
Push to release
11