Adjusting The Position Of The Gear Change And Rear Brake Pedals - Ducati MULTISTRADA 1000DS S Anleitung- Und Instandhaltungsheft

Adjusting the position of the gear change and
rear brake pedals
1 3 4
The positions of the gear change pedal and brake pedal
may be adjusted relative to the foot peg to suit rider
E
preferences.
Proceed as follows to change pedal position:
Gear change pedal (fig. 25.1)
Use an open ended spanner to hold the rod (1) on flat (2)
and slacken off lock nut (3).
2
Turn the screw (4) to detach the rod (1) from the gear
change lever.
Turn the rod (1) by means of the flat (2) and move the pedal
to the required position.
fig. 25.1
Tighten the screw (4) to secure the gear change lever to
the rod (1).
Tighten the lock nut (3) against the rod (1).
35