Guide the cable that is provided on-site through the
1.
opening in the appliance.
Maintain the bending radius of the cable that is
provided on-site for connecting the appliance.
The cable must remain doubly insulated. You should
therefore strip the cable as little as possible up-
stream of the connecting terminal.
Insert the on-site cable into the terminal plug.
2.
Installing covers
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
¡
edges.
Wear protective gloves.
▶
Risk of injury when opening and closing the hinges.
¡
Keep your hands away from the hinges.
▶
Open the odour filter cartridge.
1.
Insert the side covers.
2.
Push the side covers in the direction of the appli-
3.
ance frame and screw them firmly in place.
20
Remove the new odour filter from the packaging.
4.
Insert the odour filter into the odour filter cartridge.
5.
Insert the odour filter in the correct direction.
Close the odour filter cartridge.
6.
Fit the grease filters.
7.
To avoid causing damage, do not bend the grease
filters.
Installation instructions en
39