Gaggenau AC230101 Gebrauchs- Und Montageanleitung Seite 29

The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
To be able to use Home Connect, you must first set up
the connection to the WLAN home network (Wi-Fi
to the Home Connect app.
¡ Automatically connecting appliance to WLAN home
network (Wi-Fi) → Page 29
¡ Connecting appliance to WLAN home network (Wi-
Fi) manually → Page 29
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
Please consult the documents supplied by
¡
Home Connect.
Please also follow the instructions in the Home Con-
¡
nect app.
Notes
Please note the safety precautions in this instruction
¡
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 23
Operating the appliance on the appliance itself al-
¡
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
In networked standby mode, the appliance requires
¡
a maximum of 2 W.
If you need your device's MAC address to connect
¡
to your home network, you can find this next to the
rating plate → Page 34 inside the appliance. To do
this, Remove the filter → Page 31.
Automatically connecting the
appliance to the WLAN home network
(Wi-Fi)
If your router has a WPS function, you can connect the
appliance to your WLAN home network (Wi-Fi) automat-
ically.
Note: The appliance cannot be switched on during the
connection process. Press ⁠
Requirements
Wi-Fi on the router is activated.
¡
The appliance receives signals from the WLAN home
¡
network (Wi-Fi) at its installation location.
The Home Connect app is installed on your mobile
¡
device.
The appliance and the light are switched off.
¡
Press and hold the ⁠ button until LED 7 flashes in
1.
the LED display.
Press ⁠ .
2.
a LED 1 and LED 7 flash in the LED display.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
1
) and
to cancel the process.
Press the WPS button on the router within the next
3.
2 minutes.
a If the connection has been established, the appli-
ance automatically connects to the Home Connect
app. LED 3 and LED 7 flash in the LED display.
If no connection can be established, the appliance
4.
automatically switches to the manual connection to
the home network, LED 2 and LED 7 flash in the
LED display. Log the appliance manually into the
home network or press ⁠
gin.
On your mobile device, follow the instructions for
5.
automatic network login.
The login process is complete when LED 7 stops
a
flashing and remains continuously lit.
Manually connecting the appliance to
the WLAN home network (Wi-Fi)
Note: The appliance cannot be switched on during the
connection process. Press ⁠
Requirement: The appliance and the light are switched
off.
Press and hold the ⁠ button until LED 7 flashes in
1.
the LED display.
Press ⁠ twice to start logging into your home net-
2.
work manually.
LED 2 and LED 7 flash in the LED display.
a
Follow the instructions in the app.
3.
If the connection has been established, the appli-
a
ance automatically connects to the Home Connect
app. LED 3 and LED 7 light up in the LED display.
On your mobile device, follow the instructions for
4.
manually logging into your network.
The login process is complete when LED 7 stops
a
flashing and remains continuously lit.
Connecting the appliance to the
Home Connect app
Requirements
The Home Connect app is installed on your mobile
¡
device.
The Home Connect app is opened.
¡
Press and hold the ⁠ button until LED 3 and LED 7
1.
flash in the LED display.
Follow the instructions for the Home Connect app
2.
on the mobile device.
a The login process is complete when LED 7 stops
flashing and remains continuously lit.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect has
been set up and whether the appliance is connected to
your home network.
Home Connect en
in order to restart the lo-
to cancel the process.
29