One/All Repeat; A-B Repeat; Playback In Scan Mode; Playback From A Specified Chapter/Track Or A Specified Time - LENCO CS-460 Bedienungsanleitung

4.11.1 ONE/ALL Repeat

1. In the mode of DVD disc playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF.
2. In the mode of VCD(PBC OFF)/CD disc playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button are not available.
3. In the mode of MP3/WMA disc playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.

4.11.2 A-B Repeat

Press the A-B button if you want to repeat a specific segment on a disc that you define:
1. Press the A-B button at a point (A) where you want it to be the start point of the repeat
segment.Press the A-B button again at a point (B) where you want it to be the terminal
point of the repeat segment. Then it will play the segment repeatedly.
2. To cancel the A-B repeat mode and resume normal playback, press the A-B
button for the third time.
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
During DVD playback, points A and B can be selected from different chapters.

4.12 Playback in Scan Mode

1. When playing VCD(PBC OFF)/CD discs, press the INT button to play the previous 10
seconds part of each track on the disc. Press the INT button again to resume normal
playback.
2. When playing DVD/MP3/WMA discs, the INT button is not available.

4.13 Playback from a specified chapter/track or a specified time

1. When playing DVD discs, press the SEARCH button to display a interface and highlight
the title item, then use the number buttons to input the serial number of the title; use the
direction buttons to highlight the chapter item, then use the number buttons to input the
serial number of the chapter; you can still use the direction buttons to highlight the time
item, then use the number buttons to input the desired time to start playback; finally press
the OK or PLAY button to play the selected chapter or play from the selected time.
2. When playing VCD/MP3/WMA/CD discs, press the SEARCH button to display a interface
and highlight the track item, then use the number buttons to input the serial number of the
track; you can still use the direction buttons to highlight the time item, then use the
number buttons to input the desired time to start playback; finally press the OK or PLAY
button to play the selected track or play from the selected time.

4.14 Playback in Random

15